HSV Forum


Results 1 to 6 of 6

Thread: Harrop calipers

  1. #1
    Join Date
    Dec 2013
    Posts
    483

    Harrop calipers

    Hi folks,
    I have some new brake hoses to go on and will clean up the calipers while they are off.

    Does anyone know what bleeder screws or banjo bolts the Harrops use? Mine look fairly crusty on the outside, anything different to regular Holden calipers?

    It would be handy to have a set ready to go rather than wait until off the road to find out and order.
    thanks
    Last edited by Aus78Formula; 12-08-2019 at 12:56 PM.

  2. #2
    Join Date
    Jan 2004
    Location
    Perth, WA
    Posts
    7,864
    Probably get the quickest answer if you speak to Matt at Race Brakes.
    02 9609 1101

  3. #3
    Join Date
    Dec 2013
    Posts
    483
    Yes, he did come to mind also. I'll shoot him a msg regardless over something else and report back if I have an answer.

  4. #4
    Join Date
    Jul 2013
    Location
    Melbourne SE Suburbs
    Posts
    102
    When I installed Speed Bleeders in the Harrop calipers on my VX GTS they were 3/8"-24. Hope that helps.
    GEN-F2 GTS, VS Clubsport 185i

  5. #5
    Join Date
    Dec 2013
    Posts
    483
    Thanks, I'll check them out

  6. #6
    Join Date
    Dec 2013
    Posts
    483
    I ended up reusing the same bleeders and banjo bolts but put a full kit through them even though not needed.

    VX HSV Harrop calipers rebuild completed 1-9-19 (5) by Aus78Formula, on Flickr

    VX HSV Harrop calipers rebuild completed 1-9-19 (3) by Aus78Formula, on Flickr

    VX HSV Harrop calipers rebuild completed 1-9-19 (2) by Aus78Formula, on Flickr







Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •