If you were to choose one to do first, which would it be?
Sent from my iPhone using Tapatalk
|
||
|
Results 11 to 12 of 12
Thread: LSA Lid Spacer Special!!!
-
02-10-2017 #11
GOLD Member
- Join Date
- May 2016
- Location
- Auckland, New Zealand
- Posts
- 1,015
2014 Gen-F GTS
2017 VF2 SS-V Redline Hackwagon
-
02-10-2017 #12
GOLD Member
- Join Date
- Feb 2014
- Posts
- 4,866
The LSA lid spacer is literally a 15min bolt on with minimal skill level required where as the blower plates are a blower off case.
Originally Posted by NZ EVLHSV
So I would go the LSA lid spacer.
If you ever take the blower off for some reason or to replace the spring loaded isolator for instance then do the blower plates.
Both plates certainly make a difference and shops are seeing decent HP gains from both plates.
2014 HSV GenF-GTS fitted with a Forced Induction Interchiller
2017 HSV GTSR
http://www.facebook.com/ForcedInductionInterchillers
Australia's outright Fastest 6.2L 1900 LSA VF GTS & Fastest stock bottom end
9.700 @145.22mph 21/June/2017
V-Box Results 0-100km/h in 2.47sec
Looking for colder IAT’s? we’ve achieved 11c IAT2 on a 41c day and -8c during winter.
We have proven cabin AC vent temps are better than GM spec, both IAT2's and vent temps are all on video with nothing to hide.
|
|
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts