Type: Posts; User: lmoengnr
Should have gone 3".
Just leave it in Sport mode until you clear the hills.
Lets hope we still have a few Holden dealers left in 2019... 2018 will be a very lean year.
Its good to see executive managers finally being arrested, instead of engineers 'falling on their swords'...
I thought the LT5 designation was for a twin turbo 5.3?
If you can get under the car, use a wooden hammer handle to tap around the heat shields/things and see if you can replicate the rattle.
Being a vacuum, it should be less than atmospheric pressure(negative pressure).
I think the Walkinshaw springs are Kings with a $650 paint job......
Cant help with the bonnet vents, but I had to replace the R/H guard due to damage.
They clip in fairly simply, but there is a couple of dollops of Sikaflex in the upper and lower rear corners.
Most state governments are doing the same thing using ANPR cameras.
Its not just the police using ANPR cameras....
Complete with a Powerglide transmission.....
If its like an E series, it will be above the glove box.
A bare 20" x 8.5" SV rim is actually about 30 grams lighter than a bare 19" x 8.5" Redline rim.
A bare 20" x 8.5" GTS cast rim almost weighs as much as the equivalent SV rim with tyre....
Very good for a forced induction engine.
Fair enough. I did a top end rebuild on a Vectra 2.2l engine that snapped its rubber timing belt, and bent every valve....
What was the problem? I've just replaced the intake cam phasing wheel on my son's SRi @ 110,000kms, plus did the timing belt.
Anything with more than 2 doors is a family truckster! :)
I think Alpine makes a unit that might suit.
Surely there must be someone around your area with a Tech II and the HSV software?
On the interior pic of the lid, it looks like a casting line has formed a stress raiser where the crack has formed.
Might need to be re-designed for high power applications.
Still under warranty?
No soldering iron? How about an open flame, and an old butter knife.
He should be able to find a set of SV's, with tyres, within that budget.
I do it myself as well.
As far as I'm concerned, dealers are only for new car sales, and warranty work.